Product SKU C9Z390-CGW
Form Factor ATX
Dimensions 12" x 9.6", (30.48cm x 24.4 cm)
Processor Support 9th/8th Gen Intel® Core™ Processor Family (LGA-1151) up to 120W
Memory Capacity 4 DDR4-3866+ MHz(OC) non-ECC UDIMM up to 64GB
Memory Type 2666/2400/2133/1866/1600MHz Non-ECC DDR4 SDRAM 72-bit 288-pin UDIMM
DIMM Sizes 16GB, 8GB, 4GB
Memory Voltage 1.2V
Chipset Intel® Z390 Chipset
On-Board SATA 6x SATA3 ports (RAID 0, 1, 5, 10)
On-Board Audio RealTek ALC1220 High Definition Audio
Network Controllers 1x 1GB LAN (Intel® i219V) 1x 10Gb LAN Port (Aquantia AQC 107) Wi-Fi 802.11ac dual-band 2.4/5Ghz + Bluetooth 5.0
LAN 1x RJ45 Gigabit Ethernet LAN port 1x RJ45 10Gb Ethernet LAN port
USB 5 USB 3.1 Gen 2 (1 Type C + 3 Type A + 1 Type C header) 4 USB 3.1 Gen 1 (2 rear + 2 via header) 2 USB 2.0 (via header)
Input/Output Audio 7.1 HD Jacks Optical S/PDIF out
Display 2 DisplayPort 1.2 + 1 HDMI 1.4
Keyboard/Mouse PS/2 connector for mouse and keyboard
Serial Port / Header 1x COM port (header)
Temperature Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI
PCI-Express 2 PCIe 3.0 x16 + 1 PCIe 3.0 x4 + 3 PCIe 3.0 x1 slots 2 M.2 (PCI-E 3.0 x4, 2260/2280 + 2260/2280/22110) (M-Key for SSD, Intel® Optane Ready, RAID 0, 1) 1 M.2 (E-Key for WiFi module)
BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features DMI (SMBIOS) 3.0 ACPI 6.0 USB Keyboard support
Software SuperDoctor® V Watch Dog SUPERO Booster
Power Configurations ACPI Power Management Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep mode Power-on mode for AC power recovery
Voltage +12V, +3.3V, +5V, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, Chassis intrusion header, Monitors CPU voltages, VBAT
FAN Total of 5 fan headers supporting up to 5 fans 5 fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
LED CPU / System Overheat LED Suspend static indicator LED
Other Features Chassis intrusion detection Chassis intrusion header TPM Header (TCG 1.2/2.0) RoHS
Internal I/O Ports 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 2 x CPU fan header 3 x System fan headers 1 x Chassis Optional/Water Pump Fan Connector 1 x USB 3.1 Gen 2 Type C header 1 x USB 3.1 Gen 1 header 1 x USB 2.0 header 2 x M.2 (PCIe 3.0 x4, 2242/2280/2280 + 2260/2280/22110) 1 x M.2 (E-Key for WiFi module) 6 x SATA 6Gb/s connectors 1 x COM port header 1 x TPM header 1 x Clear CMOS button 1 x Power button 1 x Reset button 1 x Diagnostic LED 1 x FP Audio Header 1 x System Panel 1 x Chassis intrusion header 2 x RGB Header(s) (+12v/G/R/B)