Go to supermicro.com >
Where to buy
System will stop at code 62(Seven-segment display) when BIOS updated from version 1.0 to 1.2 on C7Z97-OCE. The whole updated process can be finished w/o error, but system will stop at code 62 w/o display. This issue only happens with Intel i3 4130. It can
This issue only happens with Intel i3 series CPUs. Please use ROM Rev 2.0 to update your BIOS.
What is the meaning of X10SRA/C7Z97-OCE BIOS expert mode ?
X10SRA/C7Z97-OCE BIOS expert shows the items hidden by default.
What is the I/O shield for C7Z97-OCE motherboard?
You may use I/O shield part number MCP-260-00063-0N.
Our X10SAE can not boot with Intel I7-4790, but the same CPU boots up on C7Z97-OCE, any suggestion ?
We have tested I7-4790 on X10SAE and the result is pass, please use R3.0 BIOS or later to confirm I7-4790 bootable or not.
Does C7Z97-OCE have 3 PCI-E 3.0 x16?
The 3 PCI-E 3.0 x16 can be used as 16/NA/NA or 8/8/NA or 8/4/4.
I am experiencing some problems with the C7Z97-OCE motherboard we recently purchased. I have updated the BIOS from Rev. 1.0a to Rev. 1.0b. When I switch SATA mode to RAID and invoke the RAID BIOS (Ctrl "I"), it launches and then, within about 20 seconds,
Please contact with Tech Support support for a BIOS solution.
When installing Cent OS 6.5 into C7Z97-OCE, the "Unsupported Hardware Detected" message pops out during installation.
The Cent OS 6.5 cannot support C7Z97-OCE well due to old ACPI code. Please install Cent 7 for the usage.
When I install drivers for C7Z97-OCE, A warning message"Windows cannot verify the publisher of this driver software" was showed when I try to install Intel Extreme Tuning Utility. How to solve it?
This is Intel limitation. This warning message will not be removed before Version 5 of XTU is released. The XTU revision 5 is scheduled to be released in September, 2014. New driver CD will be released then.
Copyright © 2020 Super Micro Computer, Inc.